Wall pack lighting is a common term that refers to outdoor lighting. These lights are often mounted on the exterior walls of buildings, and are usually situated in locations near passing pedestrians or cars.
These LED lights are generally installed by homeowners wishing to ensure the safety of their homes, as the illumination discourages potential thieves in the area. They’re usually installed in numbers, as the multiple fixtures provide even lighting over a wider area.
LED outdoor wall packs are designed for both commercial and industrial areas, for the purpose of lighting up building exteriors. Dusk to dawn LED wall packs with photocell, or motion sensors are used for security lighting for office areas, businesses and warehouses. They automatically light up when motion is detected, and turn on when the sun sets.
The most common application of wall pack lights is using it as a safety feature. Due to the increased illumination levels, a building or area can be made more secure, especially with multiple fixtures.
LED outdoor wall packs are designed for commercial and industrial areas to light up building exteriors. Dusk to dawn LED wall packs with photocell and/or motion sensor are used for security lighting for office areas, businesses and warehouses to automatically light up when motion is detected, and turns on when the sun sets.
First and foremost, it’s crucial to point out that these LED lights outperform common lights. When set side by side with conventional lights, such as sodium vapour wall pack lights, or fluorescent lighting, they’re visibly more preferable.
Sodium vapour lights are often perceived as the most commonly used light today. They’re still frequently used today, and can be distinguished by the deep, yellow hue that they give off. When at a low pressure, these lights produce monochrome emissions. They tend to render colour poorly in exchange for relatively good energy efficiency, resulting in a rather wasteful product.
Sodium vapour lights that are at a higher pressure are slightly whiter in colour, but continue to emit light that’s generally yellow. Considering efficiency, they were the best option before LED lights arrived at the market. They’re made for high bay lighting appropriate areas – warehouse, business, and recreational facilities. High pressure sodium lights are desirable due to their low price and high energy efficiency. However, they offer the worst colour rendering on the market, and require a considerably long warm up period.
Despite being less common, fluorescent lighting is sometimes used in warehouse or industrial applications. Whilst it has cheap initial costs and a relatively high efficiency, there are several drawbacks. Firstly, the presence of toxic mercury requires waste disposal procedures after its designated lifetime is over. Its lifetime can also be decreased if it’s switched on and off, and it often requires a ballast to stabilise the light.
Generally, when compared to other lighting solutions, LED lights easily surpass them in several areas. For example, they have better CRI (Colour Rendering Index), which refers to the light’s ability of revealing the actual colour of objects, when compared to natural light.
Furthermore, they excel in terms of CCT (Correlated Colour Temperature), which is concerned with the glow given off the bulb. This can often be reddish if it’s warm, or bluish white if cold. It’s also necessary to mention Foot Candles – which refers to the amount of light that is given off from the source, and the amount of the light that hits the designated surface.
LED Wall Pack Lights have surpassed the capabilities of conventional lighting as they arrived into the market. Their decreased maintenance stems from LED lights generating light in a different way. As opposed to the conventional fuel, or filament lighting, LED lights use a diode to produce light. This means that there are fewer moving pieces that could potentially break.
Due to their higher mounting heights, changing a bulb would usually require a ladder, or in some cases, specialised hydraulic lifts. With LED lights, they require less maintenance and replacements, which saves you the time of climbing heights, or paying someone to, in order to replace the bulb.
Beyond offering better performance, there are numerous benefits to these lights. Their decreased maintenance requirements are a result of their long lifespan, which proves itself to be 4-40 times longer than the conventional light choices. They require fewer repairs and replacements, assuring you of a quality product that you won’t have to worry about replacing.
If you’re an enthusiast when it comes to saving power, then these LED lights are just the right pick for you. With less energy required to provide the same output as other lights, you’ll instantly start saving energy. As conventional lights often waste energy by emitting it as heat, and through being omnidirectional, these LED lights stand out by eliminating these two problems. As they face the desirable direction, and don’t waste energy through heat emission, they save a considerable amount of energy.
With the large market that exists today, it can seem a little daunting to choose the LED lights that are right for you. However, there are a few things you can use as a guide when choosing. Most importantly: lumens, energy saving, and the wet rating.
The level of lumens refers to the visible light produced – the brightness of the bulb. The higher the lumens, the brighter the light produced will be. Taking a look at the level of lumens is key for differentiating LED bulbs from conventional bulbs, and can be an indicator for when you want to install a brighter bulb.
A notable part of what makes up the potential for energy saving with LED bulbs is the motion sensor. It can be troubling to remember to switch the lights off every single time, which can lead to energy being wasted. However, in modern LED lamps, a motion sensor for reducing the rate of energy consumption is usually installed. The lights will automatically turn on if they sense motion, and will turn off if they don’t sense any motion. Through the use of this sensor, the energy use is lowered by a whole 90 percent.
Another significant part of choosing the right LED wall pack right is taking a look at its wet rating. The installation location can often determine efficiency, as water and humidity are significant factors when considering efficiency. If you plan on installing your LED lights in a wet location, you should consider its wet rating.
Some bulbs are built with features that allow them to operate in wet locations, which increases their life expectancy if you plan on installing them in a wet location. LED bulbs should have a UL Wet Rating, but bulbs which aren’t built to be in frequent contact with water, but are continuously exposed, will have a shorter lifetime. Therefore, the wet rating of an LED light is an important feature that you should consider when choosing your lights.